中文版 English 收藏本站 关于天力

天力磁电

全国免费服务热线400-1122-958

您当前所在位置:首页 > 新闻中心 > 专业选矿除铁技术

送白菜的娱乐平台-除铁机在运转中要注意一些什么事项?

作者:管理员     发布于:2017-05-12    

1、对于自动卸铁式除铁机,启动时人员不要站在其正前方向以免其携带铁器伤人。

1. For automatic iron unloading machine, when starting, do not stand in front of it, so as not to bring iron to hurt people.

2、运转中应注意其运行是否平稳,是否有异常杂音以及其除铁情况、,注意卸铁胶带不得跑偏、划裂。输煤皮带运转期间,一般不停除铁机。

2, the operation should pay attention to whether it is running smoothly, whether there is abnormal noise and its iron removal, and pay attention to unloading iron tape shall not be deviation, split. During the operation of the coal conveyer belt, the iron separator is usually stopped.

3、运转中密切注意励磁体的温度和风扇运转情况,当超过100摄氏度时必须停机检查。

3, in operation, pay close attention to the temperature of the magnet and fan operation, when more than 100 degrees Celsius, must stop inspection.

4、盘式除铁机卸铁操作方法:按下配电柜上向前或向后按钮,行车电磁铁到合适位置,按下励磁停止按钮,待盘体上所有铁器卸净后再将其返回原有位置,开启砺磁。

4, disc type iron removing machine iron unloading operation method: press the power distribution cabinet on the forward or backward button, driving electromagnet to the proper position, press the stop button to block excitation, all the iron unloading net after back to its original position, open the excitation.

5、运输煤皮带停车后,将其吸起的铁器全部卸净后,再停除铁机。除铁机停车期间应检查其运转部位是否缺油,应及时维护和保养。

5, after the transport of coal belt parking, the iron will be lifted out of all, and then stop the iron machine. During the period of stopping the iron machine, the running parts should be inspected for lack of oil, and should be maintained and maintained in time.



售后服务 技术支持 售后服务
新闻中心 企业新闻 选矿技术
关注我们 收藏网址
400-1122-958 周一至周六8:00-17:00 QQ在线客服
天力磁电

公司总部地址:浙江省东阳市经济开发区书院路11号 技术支持:蜂窝在线网络技术(浙江)有限公司 版权所有 © 2016 东阳市天力磁电有限公司 ,网站备案许可证号:浙ICP备15032298号-2

 微信二维码    手机网站

400-1122-958